Option Display; Returning To The Home Screen; Pop-Up Screens - KYOWA WP-120A Instructions For Use Manual

4. Settings
4-1-2-1. Inputting numerical setting values
Touch a number button with a finger, for example, to input
numerical values.
Touch OK to set the input value.
Touch delete to clear the input value.
Changing the decimal point position in load and dis-
placement display
The decimal point position in load and displacement display
is linked to the decimal point positions of the rated capacity
values and display values on the Equivalent Input Calibration
and Actual Load Calibration screens of each sensor. Input the
number of digits to be shown for rated capacity values or dis-
play values. To not show any decimal point, input the decimal
point at the end of the value and touch "OK" or "enter".

4-1-3. Option display

Selectable option buttons are shown as gray rectangles, and
the selected value is shown as a blue rectangle.
Touch an option with a finger, for example, turning its back-
ground color blue and changing the selected item.
Touch OK to set the selected value.
28

4-1-4. Returning to the Home Screen

Touch the HOME button at the top right of the window to
return to the Home Screen.
IMPORTANT
Always return to the Home Screen to make the unit record
setting changes to the nonvolatile memory.
The settings will not be retained if the unit is turned off before
returning to the Home Screen.

4-1-5. Pop-up screens

Error
Display example
This appears when an invalid value has been set in a settings
menu, for example.
Warning
Display example