KYOWA WP-120A Instructions For Use Manual page 59

4-6-4-2-3. Peak
The load peak is held when measurement values are in the zone.
Load
Judgment output (load/displacement)
OFF
HI
ON
OFF
LO
ON
Judgment output (load/displacement)
If the hold point meets a HI or LO condition, this becomes ON.
If the hold point is within the management value range, judgment for this zone will be OK.
4-6-4-2-4. Bottom
The minimum (bottom) load value is held when measurement values are in the zone.
Load
Judgment output (load/displacement)
OFF
HI
ON
OFF
LO
ON
Judgment output (load/displacement)
If the hold point meets a HI or LO condition, this becomes ON.
If the hold point is within the management value range, judgment for this zone will be OK.
Hold point
Zone interval
Hold point
Zone interval
Internal hold value
Measurement value
Time or displacement
Internal hold value
Measurement value
Time or displacement
4. Settings
59