KYOWA WP-120A Instructions For Use Manual page 63

4-6-4-2-8. Inflection point
When measurement values are in the zone, change in the slope of the load value is identified and held.
Load
Judgment output (load/displacement)
OFF
HI
ON
OFF
LO
ON
Judgment output (load/displacement)
If the inflection point meets the conditions for HI or LO, this becomes ON.
If the inflection point is within the management value range, judgment for this zone will be OK.
Inflection
point
A
Zone interval
B
Time or displacement
4. Settings
63