Digital Zero; Measurement Results Display - KYOWA WP-120A Instructions For Use Manual

1-4-1. Digital zero

The current indicator value for load or displacement becomes
zero.
Touch the ZERO button on the screen to show options for
the sensor to execute digital zero, and select the desired one
(page 31).
When using a control signal input terminal (CONTROL con-
nector), turn "Digital zero" on for load and turn "Zero balance
displacement" on for displacement.
o The range for setting the digital zero is set with "D/Z LIMIT
SETTING".
o Calibrating or turning the unit off will clear the digital zero.
o If a digital offset is set, after digital zero is executed, the load
value shown will have the set digital offset value subtracted
from 0 (page 41).

1-4-2. Measurement results display

ATTENTION
Data saved in the built-in memory are shown. See "5-2.
Memory and counter settings" on page 66 for details about
data saving settings.
1-4-2-1. Operation when the measurement
result list is open
DEL LAST
This deletes the newest measured data. Deleting measure-
ment data does not affect judgment statistics.
5, b
Use to scroll up and down on the screen to show measure-
ment results.
g, t
Use to scroll left and right on the screen to show measure-
ment results.
1. Names and functions of parts
ESC
Touch to return to the previous screen.
ENT
Show the waveform of the selected position.
−, +
Use to zoom the waveform display in and out.
Displayed items
Page 1 (initial page)
Number, overall judgment, date and time, sensor number/
work number
Page 2 and later
Band judgment cases
Overall judgment, judgment value (Y axis: load/displace-
ment), judgment position (X axis: time/displacement)
Multi-zone judgment cases
The set zones are shown in the following format.
Overall judgment, judgment value (Y axis: load/displace-
ment), judgment position (X axis: time/displacement)
1-4-2-2. Opening measurement waveforms
When the measurement result list is shown, use the 5 and b
buttons to select the data, and touch the ENT button.
Touch the SD button to save a screenshot to the SD card.
15