11. Troubleshooting
11
Troubleshooting
Usually, if the system seems not to transport the signal as expected, the best strategy for troubleshooting is to
check signal integrity through the whole signal chain starting from source side and moving forward to receiver end.
At first, check front panel LEDs and take the necessary steps according to their states. For more information
about front panel LEDs of the matrix, see the
Pictogram Legend
Section to connections/cabling.
Section to front panel operation.
Section to LDC software.
Section to LW2 protocol commands.
LW2
Section to LW3 protocol commands.
LW3
The following sections are available in the chapter:
ç Use Cases
ç How to Speed Up the Troubleshooting Process
Product Overview
section.
Applied firmware package: v1.9.0 | LDC software: v2.6.2b3
MX2 Standalone Matrix Switcher series – User's Manual
112