Editing An Edid; Creating An Edid - Lightware MX2-8x8-DH-4DPio-A User Manual

   
7. Software Control – Lightware Device Controller
7.8.4. Editing an EDID
Select an EDID from the left panel and press the Edit button to display Advanced EDID Editor window. The
editor can read and write all descriptors that are defined in the standards, including the additional CEA
extension. Any EDID from the device's memory or a saved EDID file can be loaded into the editor. The software
resolves the raw EDID and displays it as readable information to the user. All descriptors can be edited, and
saved in an EDID file, or uploaded to the User memory. For more details about EDID Editor, please visit our
website (https://lightware.com/pub/media/lightware/filedownloader/file/Application-Note/EDID_Editor_
Application_Notes.pdf) and download the EDID Editor user's manual.
EDID Editor Window
Applied firmware package: v1.9.0 | LDC software: v2.6.2b3
MX2 Standalone Matrix Switcher series – User's Manual
7.8.5. Creating an EDID
Since the Advanced EDID Editor mentioned above needs more complex knowledge about EDID, Lightware
introduced a wizard-like interface for fast and easy EDID creation. With Easy EDID Creator, it is possible to
create custom EDIDs in four simple steps. By clicking on the Create button below the left panel, Easy EDID
Creator is opened in a new window.
Easy EDID Creator Wizard
63