Unmuting Specified Output; Locking Specified Output; Unlocking A Specified Output; Preset Handling - Lightware MX2-8x8-DH-4DPio-A User Manual

   
8. LW2 Programmers' Reference
8.4.8. Unmuting Specified Output
#unmute
Unmute the <out> output.
Command and Response
ȩ {+<out>}
Ȩ (0MT<out>)CrLf
Example
ȩ {+01}
Ȩ (0MT01)
INFO:
Unmuting an output makes the previous connection active, as the crosspoint state has not been
changed by the muting command, only the output was disabled.
8.4.9. Locking Specified Output
Locking an output port. Output's state cannot be changed until unlocking.
Command and Response
ȩ {#><out>}
Ȩ (1LO<out²>)CrLf
Example
ȩ {#>01 A}
Ȩ (1LO01 A)
8.4.10. Unlocking a Specified Output
Unlocking an output port. The connection on output can be changed.
Command and Response
ȩ {+<<out>}
Ȩ (0LO<out>)CrLf
Example
ȩ {+<01}
Ȩ (0LO01)
O1 video output port is unlocked.

INFO: The device issues the response above regardless of the previous state of the output (either it was
locked or unlocked).
MX2 Standalone Matrix Switcher series – User's Manual
8.5. Preset Handling
8.5.1. Loading a Preset
#lock
Applied firmware package: v1.9.0 | LDC software: v2.6.2b3
Recall a saved preset. #preset
Command and Response
ȩ {%<preset>}
Ȩ (LPR<out>)CrLf
Example
ȩ {%Mtgroom1}
Ȩ (LPRMtgroom1)
Preset called "Mtgroom1" has been loaded and applied.
74