Lw3 Commands - Quick Summary - Lightware MX2-8x8-DH-4DPio-A User Manual

   
9. LW3 Programmers' Reference
9.16. LW3 Commands – Quick Summary
System Commands
Querying the Product Name
ç GET·/.ProductName
Setting the Device Label
SET·/MANAGEMENT/UID/DeviceLabel=<Custom_name>
ç
Querying the Serial Number
ç GET·/.SerialNumber
Resetting the Matrix
ç CALL·/SYS:softReset()
Restoring the Factory Default Settings
ç CALL·/SYS:factoryDefaults()
Querying the Operation Mode (Standby Mode) of the Matrix
ç GET·/MANAGEMENT/POWER.Operation
Switching to Standby Mode
ç CALL·/MANAGEMENT/POWER:standby()
Switching to Normal Mode
ç CALL·/MANAGEMENT/POWER:wakeUp()
Switching and Crosspoint Settings
Querying the Video Crosspoint State
ç GET·/MEDIA/XP/VIDEO.DestinationConnectionStatus
Switching an Input to an Output
ç CALL·/MEDIA/XP/VIDEO:switch(<in>:<out>)
Disconnecting the Output from any Input
ç CALL·/MEDIA/XP/VIDEO:switch(0:<out>)
Switching an Input to All Outputs
ç CALL·/MEDIA/XP/VIDEO:switchAll(<in>)
Multiple Switching
ç CALL·/MEDIA/XP/VIDEO:switchMulti(<out1_source>;<out2_source>;...;<out8_source>)
Setting the HDCP State
SET·/MEDIA/PORTS/VIDEO/<in>/SETTINGS.HdcpVersion=<HDCP_ver>
ç
MX2 Standalone Matrix Switcher series – User's Manual
Muting an Input Port
Unmuting an Input Port
Locking an Input Port
Unlocking an Input Port
Querying the Status of the Source Ports
Setting the Audio Mode
Sending CEC Commands Towards the Source
Sending a CEC Command in Text Format
Sending a CEC Command in Hexadecimal Format
DisplayPort Input Settings
Setting the Maximum Lane Number
Enabling DP Power
Setting the Maximum Link Data Rate
Enabling the Test Pattern
Setting the Conversion Mode
Restarting Link Training
Applied firmware package: v1.9.0 | LDC software: v2.6.2b3
ç CALL·/MEDIA/XPVIDEO:muteSource(<in>)
ç CALL·/MEDIA/XP/VIDEO:unmuteSource(<in>)
ç CALL·/MEDIA/XP/VIDEO:lockSource(<in>)
ç CALL·/MEDIA/XP/VIDEO:unlockSource(<in>)
ç GET·/MEDIA/XP/VIDEO.SourcePortStatus
SET·/MEDIA/PORTS/VIDEO/<in>/EMBEDDEDAUDIO.AudioMode=<audio_mode>
ç
SET·/MEDIA/PORTS/<in>/CEC.OsdString=<text>
ç
ç CALL·/MEDIA/PORTS/VIDEO/<in>/CEC:send(set_osd)
ç CALL·/MEDIA/PORTS/VIDEO/<in>/CEC:send(<command>)
ç CALL·/MEDIA/PORTS/VIDEO/<in>/CEC:sendHex(<hex_command>)
SET·/MEDIA/PORTS/VIDEO/<in>/SETTINGS.DpMaxLaneCount=<lane>
ç
ç SET /MEDIA/PORTS/VIDEO/<out>/SETTINGS.EnablePower=<enable_power>
SET·/MEDIA/PORTS/VIDEO/<in>/SETTINGS.DpMaxLinkRate=<data_rate>
ç
SET·/MEDIA/PORTS/VIDEO/<in>/SETTINGS.TpgMode=<tpg_status>
ç
SET·/MEDIA/PORTS/VIDEO/<in>/SETTINGS.Conversion=<conversion_mode>
ç
ç CALL·/MEDIA/PORTS/VIDEO/<in>/SETTINGS:dpLinkTrain()
99