Limitations Of The Displayport Video Options; Analog Audio Options - Lightware MX2-8x8-DH-4DPio-A User Manual

   
5. Device Concept
5.3.2. Limitations of the DisplayPort Video Options
DP Multi-Stream (MST) is not supported.
▪
▪ The matrix is recognized as a DP-to-HDMI converter by the connected DisplayPort source.
▪ The video input signal of 3840x2160 4:4:4 RGB 10 bit is converted to 3840x2160 4:2:2 YCbCr 10 bit or
3840x2160 4:4:4 RGB 8 bit on the DisplayPort input.
▪ Dual-mode DisplayPort (DP++) is not supported.
▪ Adaptive-Sync and FreeSync™ are not supported.
▪ HDR is not supported on the DisplayPort outputs.
5.4. Analog Audio Options
DIFFERENCE:
The -A suffix in the model name refers to the analog audio option (for more information
about the models, see the Model Comparison
▪ An external audio signal can be embedded in the HDMI stream by the Analog Audio input port. In this
case the audio from the analog input port is converted and embedded in the HDMI stream. Furthermore,
the Analog audio output ports allow to de-embed the audio of the HDMI output stream. Please note that
only stereo LPCM can be de-embedded from the HDMI signal.
The test pattern generator feature makes it possible to transmit the analog audio without any video signal.
MX2 Standalone Matrix Switcher series – User's Manual
table).
Applied firmware package: v1.9.0 | LDC software: v2.6.2b3
38