Presets - Lightware MX2-8x8-DH-4DPio-A User Manual

   
7. Software Control – Lightware Device Controller
7.7. Presets
The router can store presets and the following are stored in each slot: input/output crosspoint state, muted/
unmuted states. Preset loading has an effect on all ports, except the locked ones.

ATTENTION! When factory default settings are restored, presets are deleted.

ATTENTION! The Preset loading has an effect on all ports, except the locked ones.
#preset
Presets Tab
Applied firmware package: v1.9.0 | LDC software: v2.6.2b3
MX2 Standalone Matrix Switcher series – User's Manual
Loading a Preset
Step 1. Select the Presets tab from the Crosspoint menu.
Step 2. Select the desired preset; check the Preview panel and press the Load button. Press Yes in the
confirmation window.
INFO:
Presets that were saved by the front panel buttons previously are listed with names Button1..
Button8 as default. See the corresponding
Auto load mode
When the Auto load button is highlighted with green, the mode is active. In this case,
confirmation is not required: the selected preset is loaded immediately when the
button is pressed.
Saving a Preset to an Empty Slot
Step 1. Arrange the desired crosspoint connections in Tile view or Grid view.
Step 2. Select the Presets tab from the Crosspoint menu and type the desired Preset name in the indicated text
field, its length can up to 16 characters. The following are allowed when naming: letters (A-Z and a-z),
hyphen (-), underscore (_), and numbers (0-9).
Step 3. Press the Create New Preset button to store the configuration.
Overwriting an Existing Preset
Step 1. Arrange the desired crosspoint connections in Tile view or Grid view.
Step 2. Select an existing preset, press the Save button and Yes to confirm.
Renaming a Preset
Step 1. Select the desired preset you want to rename.
Step 2. Type the desired name and press the Rename Preset button.
Deleting a Preset
Step 1. Select the desired preset you want to delete.
Step 2. Press the Delete button and Yes to confirm.
Save or Load a Preset section.
Auto Load
60