Applied Ports (Network Settings); Factory Default Settings - Lightware MX2-8x8-DH-4DPio-A User Manual

   
13. Appendix
Parity
Stop bits
Ethernet port
Connector type (-R suffixed models)
Connector type (in other models)
Ethernet data rate
Power over Ethernet (PoE)
USB port
Connector type
USB compliance
Device class
EDID Management
EDID emulation
EDID memory
13.2. Applied Ports (Network Settings)
The following ports are necessary to pass via a network switch/firewall for a proper working between the
device and the softwares:
Purpose/function
Firmware update SCP
Device Discovery
Remote IP
LW2 protocol
LW3 protocol
Secondary protocol
HTTP port
None / Odd / Even
1 / 1.5 / 2
RJ45 female
Neutrik etherCON
10/100Base-T, full duplex with autodetect
Not supported
USB mini-B type
USB 2.0
HID
Yes
144 factory presets, 100 user-programmable
Affected
Protocol Port nr.
software
LDU2 TCP 22
LDC UDP 224.0.0.251:5353
LDC UDP 230.76.87.82:37421
- TCP 10001
- TCP 6107
- TCP 23
- TCP 80
Applied firmware package: v1.9.0 | LDC software: v2.6.2b3
MX2 Standalone Matrix Switcher series – User's Manual
13.3. Factory Default Settings
IP address
Port setting
Control protocol
Crosspoint setting
Emulated EDID
HDCP enable (input)
Audio source (input)
HDCP (output)
Signal type (output)
Conversion mode (output)
Audio mode: HDMI port (output)
Audio mode: HDMI with analog audio (output)
Scrambling
TMDS clock rate
Signal type
HDCP enable (input)
Link data rate (input)
Link lane count (input)
Audio source (input)
Audio source
Audio mode (HDMI out)
Audio mode (Analog audio out)
Analog audio output
Analog Audio Input Levels
Analog Audio Output Levels
Parameter
Network Settings
Dynamic (DHCP is enabled)
RS-232 Port
57600 BAUD, 8, N, 1
LW3 protocol
General Video Settings
Input 1 on all outputs
F49 - (Universal HDMI, all audio formats with deep color
support) on all inputs
HDMI port
Allow HDCP 2.2 and HDCP 1.4
HDMI
Depends on input
Auto
Passthrough
HDMI
HDMI+ANALOG
Auto
Auto
Auto
DisplayPort
Allow HDCP 2.2 and HDCP 1.4
Max. HBR2 (5.4 Gbps)
Max. 4 lane
DisplayPort
Audio Input/Output Ports
HDMI
HDMI
HDMI+ANALOG
Enabled (de-embedding from HDMI signal)
Balance: 0 (center)
Gain: 0 dB
Balance: 0 (center)
Volume: 0 dB
124
Setting / Value