Running The Software; Ldu2 Interfaces - Lightware MX2-8x8-DH-4DPio-A User Manual

   
10. Firmware Update
10.4. Running the Software
ATTENTION!
The computer that runs LDU2 and the target device (that will be updated) must be in the
same subnet. The update cannot be performed behind a firewall or gateway.
You have two options:
▪ Starting the LDU2 by double-clicking on the shortcut/program file, or
▪ Double-clicking on an LFP2 file.
10.4.1. LDU2 Interfaces
The software can be used over:
▪ The Graphical User Interface (GUI), or by
▪ The Command Line Interface (CLI).
LDU2 Auto-Update
At startup, the software checks if a newer version is available on the web.
MX2 Standalone Matrix Switcher series – User's Manual
Main Screen
When the software is started via the shortcut, the device discovery screen appears.
Press the Search for devices button to start finding the Lightware devices:
If you start the software by double-clicking on the LFP2 file, the firmware will be loaded. Press the Discover devices
button; all the devices will be listed that are compatible with the selected firmware pack.

INFO:
panel; see the
Applied firmware package: v1.9.0 | LDC software: v2.6.2b3
If you press the Choose package file button, the release notes of the LFP2 file will be displayed in the right
Step 1. Select the Firmware Package section.
104
DISCOVER DEVICES