Establishing The Connection; The Layout Of The Built-In Web - Lightware MX2-8x8-DH-4DPio-A User Manual

   
6. Software Control – Using the Built-in Web
System Requirements #web #builtinweb
Operating System: Microsoft Windows XP, Windows Vista, Windows 7, Windows 10, macOS, Linux.
Web Browser: Mozilla Firefox, Google Chrome, Apple Safari.
ATTENTION!
The EDID export function works only in Windows and macOS operating systems, under
Mozilla Firefox or Google Chrome web browsers.
6.1. Establishing the Connection

ATTENTION! Please be sure that the computer is in the same network as the matrix. If the computer has
multiple Ethernet connections (for example Wi-Fi and LAN connections are used simultaneously), you will
have to know the IP address for the one that is used for controlling the matrix.
Step 1. Connect the matrix and the computer either via
▪ Ethernet, with LAN patch cable (to a Hub, Switch or Router), or
▪ Ethernet, with LAN cross cable (directly to Computer).
Step 2. Change to the desired IP settings if it is needed.
Step 3. Type the IP address to the address bar of the web browser and press enter (factory default address
is dynamic).
6.2. The Layout of the Built-in Web
The built-in web page allows almost the same controlling functions that are available via the Lightware
Device Controller. Select a menu item on the left side; the default screen is the Crosspoint menu with Grid
view. One of the differences: the web page can be reloaded by clicking on the information ribbon.
ATTENTION!
Please enable the pop-up windows in your browser; certain contents are displayed in a new
window.
Tile View of the Crosspoint Menu of the Built-in Webpage
(Displayed in a mobile device)
MX2 Standalone Matrix Switcher series – User's Manual
Applied firmware package: v1.9.0 | LDC software: v2.6.2b3
40