Port Settings; Setting The Current Command Protocol; Setting The Baud Rate - Lightware MX2-8x8-DH-4DPio-A User Manual

   
9. LW3 Programmers' Reference
9.15. RS-232 Port Settings
INFO:
The current setting can be queried by using the
9.15.1. Setting the Current Command Protocol
Command and Response #serial #rs232 #rs-232
SET·/MANAGEMENT/SERIAL.Protocol=<prot_mode>
ç
pw·/MANAGEMENT/SERIAL.Protocol=<prot_mode>
æ
Parameters
Identifier Parameter description
<prot_mode> The applied protocol of
the RS-232 port
Example
ç SET /MANAGEMENT/SERIAL.Protocol=LW3
æ pw /MANAGEMENT/SERIAL.Protocol=LW3
9.15.2. Setting the Baud Rate
Command and Response
SET·/MANAGEMENT/SERIAL.Baudrate=<BAUD_value>
ç
pw·/MANAGEMENT/SERIAL.Baudrate=<BAUD_value>
æ
Parameters
The following values are accepted: 200, 300, 600, 1200, 1800, 2400, 4800, 9600, 19200, 38400, 57600,
115200.
Example
ç SET /MANAGEMENT/SERIAL.Baudrate=57600
æ pw /MANAGEMENT/SERIAL.Baudrate=57600
GET command.
Parameter values
LW2: Lightware Protocol #2 is applied.
LW3: Lightware Protocol #3 is applied.
P#2: The additional P#2 protocol is applied.
Applied firmware package: v1.9.0 | LDC software: v2.6.2b3
MX2 Standalone Matrix Switcher series – User's Manual 98