Front View - Lightware MX2-8x8-DH-4DPio-A User Manual

   
2. Product Overview
2.1. Front View
MX2-24x24-DH-24DPio-A-R
1 2 3
4
MX2 Standalone Matrix Switcher series – User's Manual
5 6 8 7 9 q w
Applied firmware package: v1.9.0 | LDC software: v2.6.2b3
1 Output Lock * Locking one or more outputs.
Control Lock * Disable or enable front panel operations. Red light means the switching and
2
function buttons are disabled.
3 Sources * Buttons to select an input, to select a preset number or to view the state of the
selected input port.
4 Destinations * Buttons to select an output or to view the state of an output.
5 Function Buttons * Switching between working modes (Take / Autotake) and performing Preset
operations.
6 Reset Button Reboots the matrix (the same as disconnecting from the power source and
reconnecting again).
7 IR Detector Reserved for future developments.
8 LIVE LED blinking slow The unit is on and operates properly.
on
POWER LED
off
9 Color Display LCD screen showing the most important settings and parameters in the front panel
menu.
Jog Dial Control Easy setting and menu navigation by the jog dial control. Turn and click the
q
Knob knob while getting feedback on the LCD.
w USB Control USB connector for local control functions (e.g. Lightware Device Controller
software).
* All models have front panel LCD and jog dial knob on the front, but some models are not supplied with front
panel buttons. See the details about the difference in the models in the
POWER LED indicates that the unit is powered on.
The unit is powered off or it has an internal voltage
problem.
Model Comparison table.
17