Nice HySecurity SlideSmart DC Series Installation And Programming Manual page 27

To edit the Menu
Press SELECT.
Two top characters
blink.
Display
UC 0
USAGE CLASS
SH 0
GATE HANDING
WT 0
GATE WEIGHT (LB)
S1 0
SENSOR #1 TYPE
S2 0
SENSOR #2 TYPE
S3 0
SENSOR #3 TYPE
Table 2. Menu Mode Navigational Buttons
To navigate through
the SELECTIONS
Press NEXT.
Continue pressing
NEXT to view all
selections.
Table 3. Programming Initial Setup Menu
SELECTIONS
0 - No Usage Class set.
1 - Single Family residential up to four units.
2 - Multi-family, hotel, etc.
3 - Industrial use, not for general public.
4 - Guarded and monitored facility, not for general public.
SELECTIONS
0 - No handing set. Gate will not move until handing is set.
Looking at the gate from the secure side, choose:
L - If the gate slides open to the left.
R - If the gate slides open to the right.
SELECTIONS
0 - Gate weight not set.
SlideSmart DC 15 and 10F
1 - Gate weight (15/10F): 0 – 400lbs (0 – 181Kg) / 0 – 250lbs (0 – 113Kg)
2 - Gate weight (15/10F): 401 – 800lbs (182 – 363Kg) / 251 – 500lbs (114 – 227Kg)
3 - Gate weight (15/10F): 801 – 1100lbs (363 – 499Kg) / 501 – 750lbs (227 –340Kg)
4 - Gate weight: 1101 – 1500lbs (499 – 680Kg) / 751 – 1000lbs (341 – 454Kg)
Once gate weight is set, program Sensor1, Sensor2, Sensor3.
0 - disabled
1 - (NOT USED)
2 - (EYE CLOSE)
3 - (EDGE CLOSE
4 - (EYE OPEN)
5 - (EDGE OPEN)
6 - (EDGE BOTH) (Swing Gates only)
7 - (EYE BOTH) (solo Slide Gates only)
Same as Sensor 1
Same as Sensor 1
To choose what is on
the display
Press SELECT.
blinking characters
become static.
Display Selections
INSTALLATION
To navigate between
menus
Press NEXT or PREV.
Advance - press NEXT.
Previous - press PREV.
MX4505 Rev.H ©2022
27 27