Horizon Fitness BOOK BINDER BQ-470 Important Information Manual page 58

3-2 Doing the Changeover
Enter the cover sheet dimension.
• Measure the length of the covers to be bound.
• Available range: 225.0 to 660.0 mm (8.860" to
25.985") (in 0.1 mm or 0.005" increments)
• When
Keypad screen appears.
Enter the spine dimension.
• Three different spine dimension settings are
available. Select "from cover rear edge to spine
rear edge," "from cover rear edge to spine
center" or "from cover rear edge to spine front
edge."
• (to spine rear edge) has been
selected in this example.
• Measure the dimension from the rear edge of
the covers to be bound to the spine rear edge.
• Available range depends on the cover
registering settings.
• When
Keypad screen appears.
If the value entered is outside the
movement range of the cover jog guide,
the number display will change to red.
In this case, enter the value again.
Press
The settings on the Setup – Size screen are
entered, and the Setup – Glue screen
appears.
48
is pressed, the Numeric
is pressed, the Numeric
.
Setup - Size Screen
Setup - Size Screen
Cover Registering Setting
To spine
rear edge
Entered automatically
To spine
center
Spine front
edge
Numeric Keypad Screen
4 2 3 . 6
22064
30201G1
Numeric Keypad Screen
2 1 0
Movement Range
Rear Cover Jog
Guide
109 to
312 mm
(4.330" to
12.280")
Rear
edge
114 to
352 mm
(4.488" to
13.858")
Front Cover Jog
Guide
22064
30201H1
22064
30201I1