Horizon Fitness BOOK BINDER BQ-470 Important Information Manual page 30

1-3 Screen Functions
1-3-2 Bookbinding Screens - continued
Fine Adjustment – Glue Screen
Reset button
Fine Adjustment – Cover Screen
20
Fine adjustments - glue
Side glue roller width:
0.5 to +5.0 mm (+0.020" to +0.200") (in
0.1 mm or 0.005" increments)
Thickness of glue on spine:
EVA: 0 to 4.0 mm (0" to 0.160") (in 0.1 mm or
0.005" increments)
PUR: 0 to 2.0 mm (0" to 0.080") (in 0.1 mm
or 0.005" increments)
Spine glue end point:
–40.0 to +40.0 mm (–1.575" to +1.575") (in
0.1 mm or 0.005" increments)
Spine glue start point:
–40.0 to +40.0 mm (–1.575" to +1.575") (in
0.1 mm or 0.005" increments)
First wiper opening:
0 to 2.0 mm (0" to 0.080") (in 0.1 mm or
0.005" increments)
Second wiper opening:
0 to 3.0 mm (0" to 0.120") (in 0.1 mm or
0.005" increments)
Fine adjustments - cover
Cover tail edge positioner left/right
adjustment:
–2.0 to +2.0 mm (–0.080" to +0.080") (in
0.1 mm or 0.005" increments)
Cover guide back/forth adjustment:
–10.0 to +10.0 mm (–0.395" to +0.395") (in
0.2 mm or 0.010" increments)
Scoring roller (registering side)
adjustment:
–1.0 to +1.0 mm (–0.040" to +0.040") (in
0.1 mm or 0.005" increments)
Scoring roller (adjustable side)
adjustment:
–10.0 to +10.0 mm (–0.395" to +0.395")
(in 0.1mm or 0.005" increments)
The double feeding is detected by the ultrasonic
sensor or the photoelectronic sensor.
- Using the ultrasonic sensor (default setting)
-
The double feeding is detected by the
photoelectronic sensor. Adjust the
sensitivity of the sensor. If the misdetection
occurs, lower the sensitivity.
Off Low
220641
0302G2
Middle High
220641
0302G1
22064
10302D1