Horizon Fitness BOOK BINDER BQ-470 Important Information Manual page 37

1-3 Screen Functions
1-3-4 Information Screens - continued
Information – Single Operation Clamp
Screen
To Information – Main Screen
Information – Single Operation Milling
Screen
To Information – Main Screen
Information – Single Operation Side
Glue/Spine Glue Screen
To Information – Main Screen
Information – Single Operation Nipping
Screen
To Information – Main Screen
Carriage clamp section
Clamp rotation
Home position
Jog: Clamp rotates while the Bookbinding Start
Buttons are pressed.
Note: The carriage clamps must always be closed before
they are moved.(They can be closed using the
Single Operation Delivery screen.) See step 1 on
Section 3-22 for details.
Clamp open/close
Set position
To close
Clamp width sensor
Home position
Clamp height adjustment
Up
A clamp can only be raised if it is open.
Milling section
Milling guide width
Home position
Milling motor
Operate
Milling blower motor
Operate
Side glue and spine glue sections
Side glue roller width
Home position
Second roller height
Home position
Glue Tank Down
(Use this when draining off the glue.)
First wiper
Home position
Second wiper
Home position
First and second roller rotation
Operate
Nipping section
Nipping width
Home position
Nipper open/close (up/down) operation
Up (nipping
without milling)
Down (nipping
without milling)
Cleaning (The nipper is open after it stops.)
1
Set position
To open
Set position
Down
Set position
Stop
Stop
Set position
Set position
Set position
Set position
Stop
Set position
Up (with milling)
Down (with
milling)
22064
10304C1
27