Horizon Fitness BOOK BINDER BQ-470 Important Information Manual page 24

1-3 Screen Functions
1-3-1 Setup Screen - continued
Glue Settings Screen
Spine glue settings
Automatic/manual switching
Automatic
The settings for the
glue on the spine are
set automatically
depending on the book
block size.
Spine glue end point
–40.0 to +40.0 mm (–1.575" to
+1.575") (in 0.1 mm or 0.005"
increments)
First wiper opening
(This can be changed only if Manual
has been selected.)
0 to 2.0 mm (0" to 0.080") (in 0.1 mm
or 0.005" increments)
The following screen will appear if you move into the Bookbinding screen before the first changeover.
Checking Changeover Screen
14
To Check Screen
Manual
The settings for the
glue on the spine are
set manually.
Side gluing settings
Side Gluing On/Off
The side glue is applied.
The side glue is not
applied.
Thickness of glue on spine (This can be
changed only if Manual has been
selected.)
(This is the distance between the milling
face and the second roller.)
EVA 0 to 4.0 mm (0.160")
(in 0.1 mm or 0.005" increments)
PUR 0 to 2.0 mm (0.080")
(in 0.1 mm or 0.005" increments)
Spine glue start point
–40.0 to +40.0 mm (–1.575" to +1.575") (in
0.1 mm or 0.005" increments)
Second wiper opening
(This can be changed only if Manual has
been selected.)
0 to 3.0 mm (0" to 0.120") (in 0.1 mm or
0.005" increments)
Changeover is initiated after return to the
home position.
Changeover is initiated.
Press this to return to the "Setup" screen
without changeover.
22064
10301C1