Too Much Side Glue Is Applied; Too Much Spine Glue Is Applied - Horizon Fitness BOOK BINDER BQ-470 Important Information Manual

4-2 Glue-Related Problems

4-2-5 Too much side glue is applied

Where to check
The clearance
between the side
glue rollers is too
narrow.
The nipper is too
high, causing spine
glue to protrude at
the sides.
The clearance
between the glue
amount adjusting
plate and the roller is
too wide.

4-2-6 Too much spine glue is applied

Where to check
There is too much
spine glue.
The wiper openings
for the spine glue are
too wide.
For PUR
The mounting screw
of the wiper shaft.
Cause and solution
• Increase the clearance between the side
glue rollers using the Bookbinding - Fine-
Tune Adjustment - Glue screen.
22064
40203B1
• Reduce the height of the nipper.
2
6
5
3
4
Reduce
22064
40205A1
• Move the glue amount adjusting plate closer
to the roller.
• Or raise the glue amount adjusting lever to
decrease the clearance.
22064
40205B1
Cause and solution
• Reduce the amount of spine glue using the
Bookbinding - Fine-Tune Adjustment - Glue
screen.
22064
40201A1
• Reduce the first wiper and second wiper
openings for the spine glue using the
Bookbinding - Fine-Tune Adjustment - Glue
screen.
22064
40204A1
• Check that the mounting screw is tightened
firmly.
22064
40206A1
Related
item
1-3-2
3-12
4
3-11
Related
item
1-3-2
1-3-2
5-7
101