Table of Contents
Advertisement
1-3
Screen Functions
1-3-2 Bookbinding Screens - continued
Operation Screen
A
Settings displayed
The job numbers are displayed here.
A
The job names are displayed here.
B
These are displayed only if the jobs have been
saved.
Test Bookbinding Screen
18
B
Operation navigation - green icons
Press the Bookbinding Start
buttons.
There is no cover at the standby
position.
Feed the book blocks.
Bookbinding can be started.
Bookbinding is now underway.
Bookbinding of the preset number
of books is complete.
Alarm red icons
The stacker is full.
A problem has occurred in the
network.
The system will try to reset. Please
wait a few seconds.
The milling set lever setting and the
touch panel setting do not match.
A cover has jammed.
Two covers have been fed.
No cover was fed.
The books were not delivered
correctly.
Test Bookbinding buttons
The machine will only do milling.
This allows you to check the milling.
The machine will do milling and
gluing only. (The cover is not
attached.) This allows you to check
the gluing.
Just one book will be bound. (The
next cover is not fed to the standby
position.)
22064
10302B1
Hide quick links:
Advertisement
Table of Contents
