Advertisement
FILE /NAME/ AAAA
This command is used to enter, examine or modify parameters
of files created in the system.
simultaneously with any one of the files
Depending on the form of the command, the following param
eters the following functions are performed.
FILE /NAME/ A A A A
FILE /NAME/ O
FILE /NAME/
FILE
FILES
EXEC AAAA— —
Execute a program .
This command is used to execute a program at address AAAA.
LIST N ---- List file
This command is used to display the lines entered by the
user into the file.
the file starting at line number N.
the .display starts at the beginning of the file.
can terminate the display by raising ADDRESS-PROGRAMMED
INPUT switch 7.
Up to six files can exist
Create a file with the name, NAME start
ing at address AAAA and make it current.
If a file with the same name already exists,
output error message NO NO.
Delete file with name NAME and make no
file current.
Note:
at location 0.
Get file NAME and make it current.
all parameters of existing current file.
Display parameters of the "current" file
in the following format with AAAA and
BBBB being the beginning of file and end
of file addresses:
NAME
AAAA
BBBB
Display the parameters of all files.
currently saved by the system.
The output consists of the lines in
IMS AI 8080
Self-Contained System
Operating System
Revision 2
"current".
No file can start
If N is not specified,
The user
)
Save
\
i
Advertisement
