Advertisement
KIT UNPACKING INSTRUCTIONS
1.
Remove all packages from the outer box.
IMSAI 8080 kit, these will consist of:
a.
Documentation Set (Manual plus two books)
b.
Cabinet Base Plate
c.
Table Top Cover (or Rackmount cover and Rackmount
painted pieces)
d.
Two large inner boxes
e.
Two small inner boxes.
2.
Largest inner box contains flat parts such as pc boards,
small sheet metal parts, two plastic panels and a mailing
tube containing the front panel mask and paper backing sheet
(latter is deleted if an OEM machine has been ordered).
3.
The next smaller size inner box contains plastic sacks of
components.
corresponding to each pc board, plus sacks for the chassis
and rackmount hardware and a sack containing the paper tape
for the IMSAI Self-Contained System software.
4.
One of the two small boxes contains the large components for
the Power Supply (transformer, capacitors, etc.).
5.
The second small box is either empty (serving as a spacer box
for packaging purposes) or contains overflow from the sack
parts box.
6.
Unpack plastic sacks only when you are ready to begin assembly
of that particular module.
IMSAI Customer Service for immediate replacement.
7.
Be careful in handling the painted sheet metal parts, the
plastic parts and the film negative to avoid scratching.
PC boards should not be stacked without protective material
between to avoid destroying or shorting traces.
18
(There will be a plastic sack with a parts list
If any parts are missing, contact
IMSAI 8080 System
General Assembly and.
Test Instructions
For a standard
Advertisement
