Advertisement
Executive Commands
Kill current line
CONTROL-X
Enter data to memory
ENTR
Display memory data
DUMP
Create, assign or display file information
FILE
Execute a program
EXEC
Assemble a source file to object code
ASSM
LIST
List file
Delete lines of file
DELT
Any four numeric digits enters editor
1111
Move a page of data
PAGE
Set or clear break points
BREK
Proceed from break point
PROC
Optional user command at location
CUST
To initialize the system, start it at
start the system without initializing it, start at
0003.
The executive has one error message ....WHAT?.... indi
cating an improper command or an error on parameters
following the command.
Command Format
ENTR AAAA --- Enter data to memory
This command is used to enter data to memory starting
at address AAAA and continuing until a slash (/)
followed by a carriage return is entered.
entered in hexadecimal format.
Ex ample;
ENTR 500
0 0A 30 44 FF FE/ (cr)
DUMP AAAA BBBB --- D u m p ■ contents of memory
This command is used to examine the contents of memory.
The values contained in memory from locations AAAA to
BBBB are displayed in hexadecimal.
consists of the contents of up to 16 memory locations.
If BBBB is not specified, only locations AAAA will be
displayed.
IMSAI 8080
Self-Contained System
Operating System
Revision 2
2000
0000.
To re
Data is
Each line of display
Advertisement
