Advertisement
RACK MOUNT SYSTEM ASSEMBLY INSTRUCTIONS
For the rack mount system, begin by installing the rack mount cover
on the chassis.
Next install the left and right side plates to the chassis with the
front flanges pointing outwards.
machine screws on each side plate.
on the side plates should be used.
Next mount the assembly in the rack using two screws on each side
of the front flanges.
bly into the rack will vary according to the individual rack.
is suggested that the rear of the assembly also be supported in the
rack.
Finally, mount the front face panel onto the side plate
flanges using four #10 round head
NOTE:
for installations without slides where easy removal of the
computer is desired, the side plates can be mounted directly in the
rack and the computer can be slid on its rubber feet on the bottom
flanges of the side plates.
case should be fastened securely to the back of the rack cabinet.
Use five 6-32x5/16" Phillips pan head machine screws.
Hardware requirements for mounting the assem
The rear of the side plates in this
IMSAI 8080 System
Cabinet Assembly Instructions
Use four 6 - 3 2 x V Phillips pan head
The forward holes in each pattern
screws and clips.
It
1 - 3
Advertisement
