IMS IMSAI 8080 User Manual page 333

ASSEMBLY INSTRUCTIONS
TO MOUNT SIOC ONTO SIO BOARD
The SIOC mounting is accomplished by placing the fiber
washers into each of the three holes in the SIOC on the
component side and each of the three holes in the SIO board
on the circuit side.
fiber washer and spacers into the fiber washer of the SIO
board. Plug in the board interconnect header during align­
ment before tightening screws.
(cont.)
Then insert the #6 screws through the
SIOC Rev. 2
Assembly
Instructions
9A - 9