Configure White Flood Layers - Oce Arizona 365 GT User Manual

Configure White Flood Layers

Configure White Flood Layers
If you want to create linearizations and ICC profiles with a white underlay, we recommend you
configure one or more flood fill white layers for white based on the desired opacity for your
application and one layer for CMYK data.
Procedure
1. Configure your layers for the white layer to print closest to the media.
[125] Configure Flood Layers
2. This configuration allows you to print your linearization and ICC target swatches directly from
Media Manager with a white underlay.
NOTE
You can always go back and change the layer configurations after you have completed
the processes that requires such a configuration. Keep in mind though that if you use
one or two layers of white it will affect output color rendering and overall density.
3. For the best color fidelity, create separate media models for one or two layers of white usage.
156 Chapter 8 - How to Work With White Ink