Oce Arizona 365 GT User Manual page 84

Roll Media Manager
Icon
Initialize
Print Side
Normal Move / Slow
Move
How to Use the Roll Media Manager
The procedures to use these icons to load and unload media is explained in the next two
sections. How to verify or change media parameters and to actually print a roll media job is
explained in the section "How to Print on Roll Media".
84 Chapter 6 - How to Operate the Roll Media Option
Function
Sets up tension on the loaded media and prepares the RMO to print on
that media.
Operator can select either Print Side In or Print Side Out. Print Side In
allows you to print on the back side of the media. The default setting is
Print Side Out.
Normal Move is the default state. When you click on this icon in the top
right corner, it changes to Slow Move. Use Slow Move when you want
to advance or rewind media and stop it at a more precise position. It
causes the dual foot pedal switches to move the media more slowly.