Roll Media Manager - Oce Arizona 365 GT User Manual

Roll Media Manager

Introduction
The Roll Media Manager is the area of the printer software where you prepare to print on roll
media. With this menu you can load and unload media, change media type and parameters, and
initialize the printer to prepare it to print on roll media. This section introduces the icons in the
Roll Media Manager that are necessary to load and initialize a roll media print job. How to set the
Media parameters and print the job is explained in the section "How to Print on Roll Media".
How to Access the Roll Media Manager
Click on the Roll Manager icon in the command toolbar of the Print Job module.
[41] Roll Manager icon
The Roll media manager is displayed in the center of the screen.
[42] Roll Media Manager
Roll Media Manager Menu
Roll Media Manager Icons
Icon
Load
Unload
Function
Allows the operator to load new media. Set the foot pedal switches to
the Load state.
Prepares the RMO to allow the operator to cut the existing media, re-
move it, and replace it with a new roll.
Chapter 6 - How to Operate the Roll Media Option
Roll Media Manager
4
83