Oce Arizona 365 GT User Manual page 146

How to Use Media Models
When you process a print job in ProductionHouse with this media model as provided, the job
information displayed in the Arizona 350 GT Print Job Control module will appear as follows:
[107] Parameters
Select the Layers button in the Job Control module to activate a graphical representation of the
Print Layers that allows you to verify the layer order.
[108] Layers
One White Layer on Mid-tone Grey Surface
Download file: Oce_Arizona_350_GT_MidtoneSubstrate.OML
This media model is intended for a mid-tone grey print surface. Due to the relative lightness of
the media it is not necessary to place two layers of white ink to provide opaque white coverage
before your CMYK image data. As two layers of white are not necessary, this media model
contains only one white layer followed by the CMYK color data. Since a Flood Fill layer has been
defined, no additional file prep is required to activate white printing. To re-purpose for Spot
usage, just access the drop down menu and change from Flood Fill to Spot Data and ensure that
the file has been properly built for this type of output or appropriately edited with the Spot Layer
Tool. A 2-layer configuration will result in faster print speeds than those configured for 3 layers.
[109] Define Layers
When you process a print job in ProductionHouse with this media model as provided, the job
information displayed in the Arizona 350 GT Print Job Control module will appear as follows:
146 Chapter 8 - How to Work With White Ink