Oce Arizona 365 GT User Manual page 219

How to Remove Uncured Ink on the Capstan
[162] Wipe up remainder of ink
4. Allow adequate time for capstan to dry.
NOTE
If the scrubbing action leaves fibers from the cloth on the surface, wait for the surface
to dry completely, then follow the procedure listed above for Removing Solid Debris.
When the capstan is kept clean and its rubber surface free of blemishes or defects you
will be ensured of accurate media transport and optimal print quality. If its surface is
badly damaged the capstan will need to be replaced.
Chapter 11 - Printer Maintenance 219