Oce Arizona 365 GT User Manual page 151

3. Select the CMYKW Quality Ink Configuration from the drop-down menu.
[116] Set Quality Ink Configuration
NOTE
In order to make use of the multi-layered print mode, the Quality-Layered Mode must be
used. It is also possible to generate white flood data with limited functionality in one layer
using the Production, Quality and Fine-Art CMYKW modes. The CMYKW print mode
should not be used with files containing both white and CMYK data in a single layer print
mode, as the results will be of poor image quality.
4. Select CMYK for the Process Colors option.
5. Click > Spot Color Setup.
6. Click > Insert to add "Spot 1" to the Spot Color Setup dialog.
[117] Insert Spot1
7. If you want to change the preview color of your spot layer, highlight "Spot 1" and click > Edit .
NOTE
If you change the name of your Spot color to anything other than Spot 1, the data file
you prepare for this media must also make use of the exact same spot color name.
Also, this name must be set up in Color Management/Edit Profiles/Spot Channel
Replacement. Do not use the name "White" as that name will prompt ProductionHouse
to treat it in a particular manner not desired for the white ink workflow.
The preview color chosen here will be used as an indication of Spot color layer usage
in the Preflight preview. We suggest that you select a color that is easily recognized as
non-image data, such as a fluorescent or pastel color. Also, if you use the same color
for all your media configurations it will provide quicker identification of the spot data in
Preflight.
How to Create a Media Model for White Ink
Chapter 8 - How to Work With White Ink 151