Oce Arizona 365 GT User Manual page 91

8. Tape the media onto the core. The media should have a clean straight edge prior to taping. First
tape the center of the media to the core, and then tape both ends of the media.
[49] Tape Media to the Take-up Roll Core
NOTE
Important: Use the supplied ruler to check that the edge of the take-up roll is aligned
within 1mm of the feed roll.
9. Select the "Initialize" icon from the Roll Media Manager to prepare the RMO for printing.
Loading the Media - Standard Method
Chapter 6 - How to Operate the Roll Media Option 91