Oce Arizona 365 GT User Manual page 154

How to Configure Layers and Print Order
4. Click on Define Layers to open this dialog and the following window should appear.
[122] Define Layers
5. This is where you can set up how you want the ink to behave in each layer. It is not necessary to
use all 3 available layers; it is also possible to build a media using only one or two layers. The ink
usage options for CMYK, White Spot and White Flood Fill data are set to default values. If you
want to edit these layer options, choose Custom from the drop down menu and click on the
Custom tab to the right of this. This action will bring up the Define Single Layer window.
[123] Define
[124] Define Single Layer
154 Chapter 8 - How to Work With White Ink