Oce Arizona 365 GT User Manual page 194

Empty Ink Waste Trays
2. Place a suitable empty container that holds at least 1.5 liters under the Purge waste tray drain.
3. Turn the Purge waste tray spigot until it starts to drain the waste ink. Close it when all ink has
drained.
4. Shut off the valve when ink no longer drains out (or if the container becomes full). Use a piece of
cloth or paper towel to wipe it clean as some ink can remain inside and drip out later when the
printer is in motion.
NOTE
Tip:
You can also use a funnel or a long piece of tubing that allows you to place the
container on the floor for convenience.
5. Slide the Maintenance station drawer open and hold a suitable container under the Spit waste
tray spigot. Turn the spigot to open it and wait for the waste ink to drain.
6. Dispose of the waste material in a suitable, environmentally-friendly manner.
194 Chapter 11 - Printer Maintenance