Oce Arizona 365 GT User Manual page 17

Label
1
Persons for Machinery Directive
• Instructed person
This User Documentation describes safeguards for the protection of an instructed person.
Instructed person is a term applied to persons who have been instructed and trained by a
skilled person, or who are supervised by a skilled person, to identify energy sources that may
cause pain and to take precautions to avoid unintentional contact with or exposure to those
energy sources.
Power source
WARNING
• Put the power plug directly into a power outlet that has the same configuration as the plug.
The use of an adapter can result in an inadequate power supply. If a proper power outlet is
not available, ask a qualified electrician to carry out the installation.
• This machine has two power inlets. Do not insert both power cables in one phase group.
IMPORTANT
• Consult your authorized service representative before you connect other equipment to the
same power outlet.
• Do not connect the machine to a mains voltage or frequency which differs from the value
stated on the power marking label.
NOTE
• When a connection to a different mains voltage is required, contact your authorized service
representative.
Type Description
CAUTION Warning: Optical radiation.
Read the user documentation before you perform this
task or action.
Translation: Avoid looking directly at lamps. Optical radi-
ation according EN 12198 Category 2. Special restric-
tions and protective measures are essential when the
machine is used in the workplace. Wear eye-wear,
gloves and long sleeves when using this printer.
The type of eye protection and gloves are prescribed in
this document.
Safety and Environment Information
Chapter 3 - Safety Information 17