How To Configure Layers And Print Order - Oce Arizona 365 GT User Manual

How to Configure Layers and Print Order

[118] Spot Preview Color
NOTE
The printer only has one available white ink spot channel, so do not insert a second
spot or the Rip will treat files using this configuration as separations.
8. Click > OK.
NOTE
Most of the steps for creating a media with a white spot are similar to the regular
workflow. Please do not attempt these steps unless you have experience creating media
profiles. The profiling steps and color theory are not explained in detail and are not
covered in this document.
9. For the best quality output results, we recommend that you continue building your media model
as described below.
How to Configure Layers and Print Order
If order to make use of the multi-layered Quality-Layered print mode in your printer, you must
configure your layers and also set what inks will print on each of the layers.
Procedure
1. In Basic Mode Settings, click on Mode Options.
[119] Mode Options
152 Chapter 8 - How to Work With White Ink