Oce Arizona 365 GT User Manual page 138

How to Create a Spot Channel Path in Illustrator
4. Once that is done, replace path in the group above the image and clipping layers. Ensure that
Overprint is turned on.
[93] Replace path in Group
5. Save the file.
NOTE
In testing, we have found the .eps file format to be the best. However, Postscript and
PDF files will work as well, but may require some additional setup. Make sure that
when you save the file, "Preserve Overprints" is enabled.
It is also possible and sometimes preferable, to print directly from Illustrator to Rip-Queue. For
instructions on how to do this, see the Onyx web site for a document called "Printing From a
Mac" (it also contains generic information on printing from Windows-based systems).
6. Open the file in ProductionHouse.
138 Chapter 8 - How to Work With White Ink