Oce Arizona 365 GT User Manual page 145

How to Use Media Models
[104] Print Layers
Backlit Application on Clear Substrate
Download file: Oce_Arizona_350_GT_WhiteInk_ClearBacklit.OML
This media model is intended for use when you print data for backlit viewing on clear materials.
Clear materials do not provide any light diffusion, which is often desired for more pleasing
presentation on non-diffused light sources. Therefore, this media is built using 2 layers of CMYK
data for color density followed by a layer of white flood data for diffusion. Since a Flood Fill layer
has been defined, no additional file prep is required to activate white printing. Because this media
is built for second surface backlit viewing, it will be necessary to set Print Reflection in Print Setup
in order to have the image correctly oriented when it is viewed.
[105] Define Layers
[106] Print Reflection
If you want to re-use this media model for images to be viewed from the front, or print surface,
simply re-order the layers with flood fill at the bottom and turn off Print Reflection.
Chapter 8 - How to Work With White Ink 145