Roll Media Option Hardware - Oce Arizona 365 GT User Manual

Roll Media Option Hardware

Roll Media Option Hardware
Introduction
The Roll Media Option (RMO) allows printing on media that is supplied on a roll.
[40] Roll Media Option Components
Component Locations
Roll Media Hardware
Component
1) Dual Foot Pedal Switches
2) Media Drive Couplers
3) Accessory Holder
4) Take-up Media Shaft
5) Supply Media Shaft
Hardware Function table
The Roll Media Option consists of a supply media drive, media tension bar, capstan roller,
vacuum platen, media gimbal, and a take-up media drive. This system accurately advances the
roll of media during printing. The roll media is positioned with a high resolution media encoder.
This ensures accurate and high quality prints on various core media.
Roll Media Hardware
Component
1) Dual Foot Pedal
Switches
2) Media Drive Cou-
plers
78 Chapter 6 - How to Operate the Roll Media Option
Function
6) Media Access Door
7) Media Cut Guide
8) Media Tension Bar
9) Vacuum Platen
10) Gimbal
11) Capstan
Function
The dual foot pedal switches areused to control media feed in both for-
ward and reverse directions. Function varies depending on whether
media is loaded or unloaded.
The couplers keep the media shafts in place and engaged to the drive
motor. In the open (horizontal) position they allow the media shafts to
be removed.
4