Oce Arizona 365 GT User Manual page 143

How to Use Media Models
image layer, followed by a white layer (in this media the white is a flood fill layer, but a properly
setup Spot layer may provide the same desired effect), and finished with another CMYK image
layer. Since a Flood Fill layer has been defined, no additional file preparation is required to
activate white printing.
If you print second surface (print on the back side of clear media) it may be necessary to choose
Print Reflection in Print Setup in order for the images to read correctly when viewed from the
front side of the media.
[98] Day/Night Define Layers
[99] Day/Night Print Reflection
When you process a print job in ProductionHouse with this media model as provided, the job
information displayed in the printer's Print Job Control module will appear as follows:
[100] Day/Night Parameters
Select the Layers button in the Job Control module to activate a graphical representation of the
Print Layers that allows you to verify the layer order.
Chapter 8 - How to Work With White Ink 143