Roll Media Option Maintenance; Rmo Maintenance Guidelines - Oce Arizona 365 GT User Manual

Roll Media Option Maintenance

Roll Media Option Maintenance

RMO Maintenance Guidelines

Introduction
The Océ Arizona 365 GT operator is responsible for the regular maintenance of the printer and, if
it is installed, the roll media option. When the RMO unit is kept clean and free of blemishes and
defects, you will be ensured of accurate media transport and optimal print quality. This section
provides information about what is required for proper RMO maintenance and cleaning.
NOTE
Any time there is any foreign matter or debris on the platen or the capstan it must be removed
immediately. Any spilled UV ink must be removed immediately, before it can cure from
exposure to light.
RMO Maintenance
The following table provides our recommended maintenance activities. This is a minimum
requirement and frequency will depend on environmental conditions and operator work habits.
How to clean the capstan is explained in detail in the next section.
Maintenance Action
Clean the platen
Clean the capstan
Clean the media loading bay
214 Chapter 11 - Printer Maintenance
Contaminant
Ink
Glue (release liner)
Silicon (release liner)
Paper dust
Coffee, tea, lemonade, milk, etc.
Ink (cured, uncured)
Glue (release liner)
Silicon (release liner - e.g. Avery control tag 180)
Dust
Ink