Oce Arizona 365 GT User Manual page 147

How to Use Media Models
[110] Parameters
Select the Layers button in the Job Control module to activate a graphical representation of the
Print Layers that allows you to verify the layer order.
[111] Layers
White Flood Fill in Production Mode
Download file: Oce_Arizona_350_GT_WhiteInk_ProductionFlood.OML
This is the only media within the provided White Ink Workflow Media Model set that is not in
Quality-Layered mode. This media is to be used as either a pre-print or post-print flood fill when
the speed of application is foremost and fully opaque white coverage is not necessary. This mode
is not intended for 4 color CMYK plus white print jobs; it is simply a means to lay down white ink.
First you must create a file that is sized at the final output dimensions required. Then fill it with
either Spot 1 data, or leave it as a single color and then subsequently address it with white Spot
data within Preflight's Spot Layer Tool.
[112] Setup Spot Color
Chapter 8 - How to Work With White Ink 147