Change Ink Bags - Oce Arizona 365 GT User Manual

Change Ink Bags

Introduction
The ink is supplied in collapsible bags. An ink bag can be replaced at any time. An ink bag can be
changed during a print job. It is not necessary to stop the printer.
When to do
Ink bags should be replaced if:
• The printer displays an "Error: ink fill timed out" message.
• The operator sees that the bag is empty.
• An ink bag is nearly empty and the operator wants to leave the printer unattended during a
long print and does not want the ink to run out. The nearly empty bag can be reconnected and
used up later when the operator is present.
CAUTION
Use appropriate safety equipment - nitrile gloves and eye protectors. Take precautions to avoid
ink on your skin or in your eyes. Be sure to read the section on Safety Guidelines for Ink
Materials before handling UV inks. Also, read the SDS sheets available from the Océ Downloads
website for more information on ink safety and handling.
Remove the Quick-Release Coupler
Procedure
1. Open the clear plastic door on the Ink Station.
2. Identify the ink bag to be replaced.
3. Press the quick-release coupler button at the bottom corner of the ink bag.
4. Unhook the bag from the top of the ink station.
5. Replace with a new ink bag of the same color.
6. Push the quick-release coupler at the bottom corner of the new bag into place.
NOTE
If you place a bag in the wrong ink station (for example, yellow ink in the black ink
station) the display will show an error message and the printer will not print until the
correct bag is installed.
Chapter 9 - Ink System Management
Change Ink Bags
169