Oce Arizona 365 GT User Manual page 202

How to Change Ink Filters - How to Change an Ink Filter
3. Disengage the ink bag for the color of filter you will replace. To do this press the release tab on
the left side of the quick-release ink bag coupler and then pull it out to disconnect the ink bag.
[145] Remove Ink bag coupler
4. Remove the two screws that hold the ink filter enclosure cover in place (thumbscrews can be
loosened by hand or use a Philips screwdriver if they are too tight).
[146] Remove Ink Filter Enclosure Cover
5. Locate the bleed tube valve on the top of the ink filter you are going to change (the cap that holds
it in place indicates the color of the ink line into that filter).
202 Chapter 11 - Printer Maintenance