Table of Contents
Advertisement
1
Using the Probe
6
For high signal integrity probing, the N2797A 1.5 GHz active
probe is a perfect complements to Agilent's 500 MHz –
600 MHz and 1 GHz bandwidth scopes.
The probe is powered directly by the InfiniiVision and
Infiniium AutoProbe interface, eliminating the need for an
additional power supply. The probe also come with a
number of accessories that allow for easy connections to the
circuit under test. Refer to
WARNING
Handle the probe with care to avoid injury, especially when it is fitted
with the sharp spring or rigid tip.
CAUTION
This probe is an ESD sensitive devices, particularly at the probe tips.
Follow standard ESD precautions when handling. Remove tip accessories
when storing the probe.
CAUTION
Before using the probe, refer to
CAUTION
Handle the probe cable carefully to avoid damaging it through excessive
bending or pulling. Avoid any mechanical shocks to the probe in order to
guarantee accurate performance and protection.
"Supplied Accessories"
"Safety Information"
on page 24.
N2797A User's Guide
on page 8.
Advertisement
Table of Contents
