Setting The Source Mac Address Of Lldp Frames To The Mac Address Of A Vlan Interface; Enabling The Device To Generate Arp Or Nd Entries For Received Management Address Lldp Tlvs - H3C S5560S-EI Series Configuration Manual

Step
3.
Enable LLDP trapping.
4.
Enable LLDP-MED
trapping (in Layer 2
Ethernet interface view or
management Ethernet
interface view).
5.
Return to system view.
6.
(Optional.) Set the LLDP
trap transmission interval.
Setting the source MAC address of LLDP frames
to the MAC address of a VLAN interface
Step
1.
Enter system view.
2.
Enter Layer 2 Ethernet
interface view.
3.
Set the source MAC
address of LLDP
frames to the MAC
address of a VLAN
interface.
Enabling the device to generate ARP or ND
entries for received management address LLDP
TLVs
This feature enables the device to generate an ARP or ND entry for a received LLDP frame that
carries a management address TLV. The ARP or ND entry contains the management address and
the source MAC address of the frame.
You can enable the device to generate both ARP and ND entries. If the management address TLV
contains an IPv4 address, the device generates an ARP entry. If the management address TLV
contains an IPv6 address, the device generates an ND entry.
To enable the device to generate an ARP or ND entry for a received management address LLDP
TLV:
Step
1.
Enter system view.
Command
•
In Layer 2 Ethernet interface view or
management Ethernet interface view:
lldp [ agent { nearest-customer |
nearest-nontpmr } ] notification
remote-change enable
•
In Layer 2 aggregate interface view:
lldp agent { nearest-customer |
nearest-nontpmr } notification
remote-change enable
lldp notification med-topology-change
enable
quit
lldp timer notification-interval interval
Command
system-view
interface interface-type interface-number
lldp source-mac vlan vlan-id
Command
system-view
208
Remarks
By default, LLDP trapping
is disabled.
By default, LLDP-MED
trapping is disabled.
N/A
The default setting is 30
seconds.
Remarks
N/A
N/A
By default, the source MAC
address of LLDP frames is the
MAC address of the egress
interface.
Remarks
N/A