EPSON Stylus Pro 10000/10000CF/10600
Paper feed adjustment offset
Offset value is set to add to the actual paper feed adjustment value.
The setup value is always valid regardless of mechanism sequence command "Paper
feed adjustment mode" setting.
<Format> "XXx=<nn>"
• Bias value is set for pigment "XXO" or dye "XXP".
<Operation>
• The value increases/decreases with "Paper feed" + or - button.
• Setting value is saved into NVRAM with "Enter" button.
Conversion table version
System table version (XxS)
It displays version No. and changed times of paper feed adjustment
conversion table saved in the printer.
<Format> "XXS=<mmmm1><mm2>"
<mmmm1> indicates NVRAM version when table is initialized in 4 letters in
hexadecimal. <mm2> <nn2> indicates renewed times in 2-figure.
Change timing of the display is as follows
<mmmm1>: when the table is initialized after shipment form manufacturer
and F/W re-installation
<mm2>:
When system table value of maintenance mode 2 is changed.
(System table XX1~XX5)
NOTE: 0 clear for <mm2> is when system table is initialized.
User table version
it indicates user table version No. of when an user started to change the user
table.
<Format> "XXU=<nnnn2>"
<nnnn1> indicates NVRAM version when the user table is initialized in 4-
figure hexadecimal number. <nn2> indicates renewed times in 2-figure.
NOTE: 0 clear for <nn2> is during system table initialization (includes same
version)
Stylus Pro 10600
Thank You For Using TheServiceManualShop.com
User Table Initialization
Selecting this menu allows the users to initialize paper feed adjustment conversion
table in system table.
Thank You For Using TheServiceManualShop.com
Product Description
Revision D
338