Print Head Cleaning - Epson Stylus Pro 10000 Service Manual

EPSON Stylus Pro 10000/10000CF/10600

5.4.4.16 Print head cleaning

This is the item that is carried out at the time of the end of the production process or
before the head exchange.
Figure 5-72 showing the head washing menu sequence.
Please Dischg. I/C
If for some reason the process cannot move to the next part
of the After the regular cartridges are removed, install the
discharging cartridge and then press the [Enter] button.
Ink Blowing
Completed after ink discharge
Set Cleaning I/C
After the discharging cartridge is removed, install the
cleaning cartridge and then press the [Enter] button.
Head Cleaning
Completion of cleaning liquid filling
Please Dischg. I/C (2)
After the cleaning cartridge is removed, install the
discharging cartridge and then press the [Enter] button.
Cleaning liquid Blowing
Completion of cleaning liquid discharge
Adj : Counter Clear
Figure 5-72.
Adjustment
Thank You For Using TheServiceManualShop.com
Pause
Ink Dischg. Skip
Enter
Pause
Head Wash Skip
Enter
Pause
[Enter] END
Enter
Thank You For Using TheServiceManualShop.com
Self-Diagnostics
The [Enter] key will not be effective if the cartridges are not completely inserted
after the cartridges have been fully removed during display of "Please Dischg. I/
C," "Set Cleaning I/C" and "Please Dischg. I/C (2)." (Cannot shift to next part of
sequence.)
If the [Pause] key is pressed while any of the 6 color cartridges are not fully
removed during display of "Please Dischg. I/C" or "Set Cleaning I/C," "Check
Cartridge" will be displayed.
Shift to the next part of the sequence by pressing the [Enter] key during display of
"Check Cartridge."
If the sequence cannot shift due to a problem, "Reset ** I/C" will be displayed.
Do not carry out the counter clear of the menu that is displayed
C A U T I O N
at the end of the head washing.
If the "Adjustment counter clear" was displayed, turn off the
power supply of the printer and get out of from the self
diagnostic operation mode.
Reason: Even the binding of the dye/paint is cleared by the
counter clear. After then, the printer becomes dye/paint selecting
condition, in the case that there is not the ink cartridge for
starter and you can not go ahead previously.
Revision D
243